1.When the machine is not working, the marking machine and computer power should be cut off

2.When the machine is not working, cover the field lens to prevent dust from contaminating the optical lens

3.When the machine is working, the circuit is in a high voltage state. Non professionals should not inspect it during startup to avoid electric shock accidents

4.In case of any malfunction of this machine, the power should be cut off immediately

5.Do not move the marking machine during operation to avoid damaging the machine

6.During the use of this device, pay attention to the use of the computer to avoid infection with viruses that can damage computer programs and cause abnormal device operation

7.If any abnormalities occur during the use of this device, please contact the dealer or manufacturer. Do not disassemble or assemble it yourself to avoid damaging the equipment

8.When using equipment in summer, please keep the indoor temperature at around 15-35 ℃ to avoid condensation on the components, which may cause them to burn out

9.This machine needs to be shockproof, dustproof, and moisture-proof

10.The working voltage of this machine must be stable. If necessary, please use a voltage regulator

11.When connecting or unplugging the rotary worktable plug, please turn off the laser power before proceeding to avoid equipment damage

1.When the machine is not working, the marking machine and computer power should be cut off
2.When the machine is not working, cover the field lens to prevent dust from contaminating the optical lens
3.When the machine is working, the circuit is in a high voltage state. Non professionals should not inspect it during startup to avoid electric shock accidents

4.In case of any malfunction of this machine, the power should be cut off immediately

5.Do not move the marking machine during operation to avoid damaging the machine

6.During the use of this device, pay attention to the use of the computer to avoid infection with viruses that can damage computer programs and cause abnormal device operation

7.If any abnormalities occur during the use of this device, please contact the dealer or manufacturer. Do not disassemble or assemble it yourself to avoid damaging the equipment

8.When using equipment in summer, please keep the indoor temperature at around 15-35 ℃ to avoid condensation on the components, which may cause them to burn out

9.This machine needs to be shockproof, dustproof, and moisture-proof

10.The working voltage of this machine must be stable. If necessary, please use a voltage regulator

11.When connecting or unplugging the rotary worktable plug, please turn off the laser power before proceeding to avoid equipment damage

12.If the equipment is used for a long time, dust in the air will adhere to the lower surface of the focusing lens. Mild cases may reduce the power of the laser, affecting the marking effect, while severe cases may cause the optical lens to absorb heat and overheat, leading to explosion.When the marking effect is poor, the surface of the focusing lens should be carefully checked for contamination. If the surface of the focusing lens is contaminated, it should be noted that the lower surface of the focusing lens should be cleaned.Be particularly careful when removing the focusing lens, be careful not to damage or fall it, and also do not use hands or other objects to remove the primary focusing lens surface.The cleaning method is to mix anhydrous ethanol (analytical grade) with ether (analytical grade) in a ratio of 3:1, dip a long fiber cotton swab or lens paper into the mixture, gently scrub the lower surface of the focusing lens, and replace the cotton swab or lens paper every time it is wiped.

1.When the machine is not working, the power supply of the welding machine should be cut off

2.When the machine is working, the circuit is in a high voltage state. Non professionals should not inspect it during startup to avoid electric shock accidents

3.In case of any malfunction of this machine, the power should be cut off immediately

4.In the working process of the welding machine, do not move, so as not to damage the machine

5.If any abnormalities occur during the use of this device, please contact the dealer or manufacturer. Do not disassemble or assemble it yourself to avoid damaging the equipment

6.When using equipment in summer, please keep the indoor temperature at around 25-27 ℃ to avoid condensation on the components, which may cause them to burn out

7.This machine needs to be shockproof, dustproof, and moisture-proof

8.The working voltage of this machine is 220V or 380V. If it exceeds the ± 5% range, a voltage regulator is required, and the equipment must be grounded

9.Pure water, distilled water or deionized water should be used in the water tank, and it should be replaced once a month. Antifreeze should be added when the temperature is below zero. If the machine is not used for a long time, the water in the water tank needs to be drained

Storage conditions and precautions

The storage of equipment should avoid hazards such as rain, humidity, tilting, rodent damage, and potholes, and ensure good ventilation. The storage environment temperature should be within the range of -10 ℃~+40 ℃, and the relative humidity should not exceed 80%.Transportation and storage for no more than 24 hours, with an allowable ambient temperature not exceeding 70 ℃. Long term outdoor storage is prohibited.For temporary storage due to various reasons, in addition to meeting the above requirements, the storage location and packaging status should be checked at any time to ensure that the equipment is not damaged.